- +90 554 542 53 54
- sanil@sanil.com.tr
VISOR® V
10 Allround Color, Advanced, 255 jobs each with 255 detectors, C-Mount, LAN interface Applications
Detecting objects
Measurement
Identify
Positioning
Counting
255 jobs with 255 detectors each
Alignment: X/Y and orientation
Pattern matching/contours: Teach-in and detection of patterns and contours
Caliper: Distance between edges
BLOB, gray threshold, brightness: Evaluation of brightness
Contrast: Evaluation of the contrast
Barcode: Reading 1
D barcodes, EAN, UPC, RSS, 2/5 Interleaved, 2/5 Industrial, Code 32, Code 39, Code 93, Code 128, GS
1, Pharmacode, Codabar
Datacode: Reading 2
D codes: ECC
200, QR code, PDF 417, ECC
200 GS
1
OCR: Reading fonts
| Opticial data | ||
|---|---|---|
Image chip type
|
Color |
|
Resolution
|
SVGA |
|
Number of pixels (H x V) [px]
|
800 x 600 |
|
Imaging chip technology
|
CMOS |
|
Sensor size [“]
|
1/3.6 |
|
Pixel size [µm]
|
4.80 |
|
Field of view type
|
C-Mount (field-of-view data depend on the lens used) |
|
Min. field of view (X x Y) [mm]
|
Abhängig vom gewählten Objektiv |
|
Focus drive
|
Dependent on the objective lens selected |
|
| Functions | ||
|---|---|---|
Network protocol
|
TCP/IP, Profinet, EtherNet/IP, sFTP, SMB, FTP, Service Port |
|
Max. number of jobs
|
255 |
|
Max. number of detectors
|
255 |
|
Alignment
|
Contour comparison, Pattern matching, Edge detection |
|
Available detectors
|
Pattern matching, Contour, Contour check, BLOB, Brightness, Contrast, Grayscale, Color value, Color area, Caliper, Classification (AI), Color list |
|
Result processing
|
Numbers |
|
Pre-processing
|
Arrangement, Filter |
|
Calibration
|
Board (measurement), Scaling (measurement) |
|
Robotic functions
|
– |
|
Additional functions
|
Archiving, Image transmission, individual overlays, Multiple image acquisition, Color channel, color distance and binarization, Multiple detection for contour and pattern matching detector, Job checksum |
|
Hardware
|
VISOR® |
|
| Electronic data | ||
|---|---|---|
Typical current draw [mA]
|
350 |
|
Type of voltage source
|
The device must be supplied by a “Class 2” power supply unit. |
|
Readiness delay [ms]
|
≤ 16,000 |
|
Reverse polarity protection
|
Yes |
|
Overvoltage protection
|
No |
|
Residual ripple [%]
|
≤ 5 Vss, level 3 |
|
Explanation of residual ripple
|
EN 61000-4-17 |
|
Polarity
|
PNP/NPN |
|
Short circuit protection
|
Yes |
|
Input threshold (High)
|
> UB-1V |
|
Input threshold (Low)
|
< 3V |
|
Input resistance [kΩ]
|
> 20 |
|
Max. output current [mA]
|
50 |
|
Explanation of max. output current
|
max. 100 mA on pin 12 |
|
Inductive loads
|
Typ.: Relay 17 K / 2 H, pneumatic valve 1.4 K / 190 mH |
|
Max. output current (total) [mA]
|
200 |
|
Ethernet transmission rate [Mbit/s]
|
100 |
|
Number of switchable IOs
|
6 |
|
Number of outputs
|
2 |
|
Number of inputs
|
2 |
|
Encoder functions
|
Yes |
|
